厦门雄霸电子商务有限公司(漳州办)
 
 
首页>产品展示>REXROTH/力士乐

MKD112B-024-KP0-BN/SA001伺服电机应用

型号: MKD112B-024-KP0-BN/SA001


产品描述

MKD090B-085-KP0-AN数字同步电动机是多个MKD系列此类电动机中的一个。在运输和储存过程中,博世力士乐交流电机应始终保持水平方向干燥,无任何负载。必须使用配有吊索的起重机进行运输。该产品符合DIN 42950规范的B5设计。在安装设备之前,应检查电机法兰支架,确保其无毛刺。必须使用四个M10螺钉以51Nm的拧紧力矩固定此法兰。只有在干燥和断电状态下,才能连接和断开装置的插头。在使用电机时,必须将它们牢固地拧紧。
MKD112B-024-KP0-BN/SA001伺服电机应用


在操作之前,必须正确对齐和安装电机。本产品的电气连接应按照制造商的规范进行。其电缆螺纹接头也必须拧紧。由于灰尘、污垢或刨屑过多,设备功能往往会受到不利影响。根据DIN ISO 281规范,该装置的轴承使用寿命为30000小时。该产品具有高过载能力,因为从定子绕组到外壳外壁的散热效果理想。这辆汽车可以运往全球任何国家。


MKD112B-024-KP0-BN/SA001伺服电机应用
该装置必须安装在海拔1000米的地方。该单位在造纸和食品加工行业运营。绝不应使其在温度变化剧烈的区域发挥作用。当电机处于静止模式时,其持续扭矩为12Nm。当电机法兰插座盖安装有密封空气接头时,必须检查产品的O形圈是否正确就位。该设备的电源连接器包括用于保持制动器和温度传感器的连接。数字电机提供一年的保修支持。Product Description
The MKD090B-085-KP0-AN digital synchronous motor is one of the multiple MKD series of such motors. This Bosch Rexroth AC motor should always be kept dry in horizontal orientation without any load during transport and storage. It must be transported using cranes equipped with lifting sling belts. The product complies with design B5 as per DIN 42950 specifications. The motor flange holder should be checked to see that it is free of burrs before the device is mounted. This flange must be fixed using four M10 screws with 51Nm tightening torque. The plug connectors of the unit should be connected and disconnected only in the dry and de-energized state. They have to be securely tightened when the motor is in use.

The motor must be aligned and mounted correctly before operation. The electric connections for this product should be done as per the manufacturer’s specifications. Its cable screw unions must also be tightened. The device functionality tends to get adversely affected due to excessive dust, dirt or shavings. The bearings of the unit have a lifespan of 30,000 hours according to DIN ISO 281 specifications. The product features high overload capability because of ideal heat dissipation from the windings of the stator to the exterior wall of its housing. The motor is shippable to any country across the globe.

The device must be installed at an altitude of 1,000m over sea level. The unit is operated in paper and food processing industries. It should never be made to function in areas where there is extreme temperature variation. The motor has a continuous torque of 12Nm when it is in standstill mode. It must be checked if the O-rings of the product are seated properly when the motor flange socket covers are mounted with a sealing air connector. The power connector of the device encompasses a connection for a holding brake and a temperature sensor. The digital motor comes with a year’s warranty support.

联系我们

18030177759 24小时在线
微信二维码
Copyright © 2022 厦门雄霸电子商务有限公司 版权所有 闽ICP备20016028号